Search This Supplers Products:Manufacturer&TradingPower SprayerChain SawBrush CutterTea Plucking MachineShredder
Paramtents
Carburetor type Diaphragm
Engine 1E40FN
Displacement 42.7cc
Forward Speed Adjustable
Cutting Width Adjustable
Standard power 1.3KW/8000rpm(1.3HP)
Packging & Delivery
Min Order20 set
Briefing
Detailed
CG430G Gasoline Brush Cutter
Engine model | 1E40FN |
Engine type | 2-stroke,air-cooled,single cylinder gasoline |
Displacement | 42.7cc |
Rated power | 1.3KW/8000rpm(1.3HP) |
Fuel tank capacity | 1000ml |
Start system | recoil |
Mixed fuel ratio | 3000-3200r/min |
Fuel | 30:1 |
Carburetor | diaphragm |
Fuel oil consumption ratio | 340 g/kw.h |
Rated Matching of CG-430G Gasoline Brush Cutter
Type | side attached |
Rotate speed | 200-3400 r/min |
Drive transfer style | automatic centrifugation |
Rotating direct of blade | anticlockwise |
Blades | nylon cutting rope head , 2 teeth ,.3 teeth, 4teeth,8teeth, 40teeth, 80teeth |
Max. cutter width | 40mm |
Engine carton | 34*34*45cm |
Shaft carton | 155*11*11cm |
Pcs/container | 560pcs/20"ft,1400pcs/40"hq |
Spare Parts Along with the CG430G Gasoline Brush Cutter
a. Multi-function tookits b. Blades c. Oil seepage d. Grass plate
Advantages of CG430G Gasoline Brush Cutter
a. pipe length: 1.65m/1.25m, ect also can be chosen
b. pipe material: stainless steel/ aluminum
c. blade: nylon type/ straight/3T/4T/8T/30T, etc
d. engine: 1E34F/TU-26/1E36F/1E40F-5/139F/GX35, etc. can be matched as you need
e. type: side hang/ backpack
f. packing can be made as your requirements
1,Clean the surface of the machine.
2,Clean the Air cleaner, use gas to clean the filter core.
3,Check all the connections whether there is leakage of oil or air.
4,Check all the screws of the engine cover to see if there are the loose or lost. If there is, please screw tightly or replace.
5, Cover the machine with plastic film and store it in dry and well ventilated.
1, Drain the fuel out of the tank completely.
2, Clean the Air cleaner carefully and reassemble it.
3, Disassemble the plug and inject a few drops of the mobile oil into the burning chamber. Pull the starter and make the piston stay at the proper place.
4, Disassemble the blade, smear a few mobile oil on each side.
5, Clean very parts carefully and smear the damage one.
6, Check each parts and replace the damage one.
7, Store the brush cutter in a dry and well ventilated place.
Item No. | CG430A | BGGX35 | CG430 | CG430G |
Power | 1E40F-5 1.25Kw | GX35 1.3Kw | 1E40F-5 1.25Kw | 1E40FN 1.3Kw |
Type | Side-attached | Backpack | Side-attached | Side-attached |
Blade | 40T | Straight | 3T | Nylon |
Shaft | 1.65m | 1.35m | 1.25m | 1.53m |
网络文化经营许可证:浙网文[2013]0268-027号|增值电信业务经营许可证:浙B2-20080224-1 2007-2024 Tradevv.com. All rights reserved.